DTP Supplies Brochure: Eyelets and More
The brochure for eyelet supplier DTP Supplies.
DTP Supplies
Eyelets, Fasteners & Machinery
DTP Supplies
For over 30 years, DTP Supplies have been supplying the world with a wide range of eyelets, press fasteners, rivets and setting machinery. From our base in Heywood, with excellent access to road, rail and air transport, we have grown to become one of the largest stockists of eyelets and fasteners in the UK, supplying over 6,500 customers worldwide. We offer a huge range of eyelets in a choice of finishes, including plated and painted to customers specifications. We also supply plastic fittings, metal rings and buckles. Most of our products can be supplied next day. With many years of technical experience, we are able to offer advice on all applications, from project inception to eventually supplying the right fastener and machine package for your application., Our excellent after sales service will ensure that the job runs smoothly. We supply a wide range of eyelet and rivet setting machinery. Ranging from simple hand held hammer tools for one-offs and prototypes, to fully automatic machines for high volume production runs. Whatever your machinery requirement, we will be able to help. Our in-house eyeleting facility means that we can also help with your production problems. Originally set up to eyelet curtains and heavier fabrics, this section has evolved to offer a sub contract service to many sectors of industry. We eyelet one-offs and large production runs, saving you the cost of buying, installing and training on specialist machinery. So, for any of your fastener requirements, please give DTP Supplies a try. Our experienced Sales staff will help with product selection and oversee your requirements right through to final delivery and beyond. If you need a unique eyelet, we can help. We can source the exact eyelet you want and supply the most appropriate machine to suit your requirements.
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 2
Contents
Metal Fastenings Poppas
Eyelets Sail
35 35 35 36 37 38 39 40 41 42 43
4 6 7 8
Turnbuttons
Sheet
S Spring Press Fasteners Ring Spring Press Fasteners
Grommet
Curtain Metric
SNAD Fasteners
10 11 11 12 13 13 14 15 16 18 20 21 22 22 23 23 24 25 25 26 28 28 29 29 29 30 31 32 33 33 33 33
Bif Rivets
DIN
Semi Tubular Rivets (Wire)
Stationery
Two Part Rivets
Boot & Shoe
Semi Tubular Rivets (Pressed)
Ski Hooks
Buckles
Loop Hooks Self Piercing
Metal Hardware
Tube
Multipurpose Plastic Eyelets
Zips
44
Signs & Banners H901
Repair Kits
46
PR103
Hinge Handle
Machinery
Sign Link Hem-It
For Plastic Eyelets HPS025
48 49 49 50
Banner Tape
PMS060 PMS070
Holdon
Banna Bungee
29FEI
Stormfix
Media Racks
For Curtain Eyelets AP1
52 52 53
Plastic Fastenings
AP2
33FP
Clip Together Eyelets
Plastic Rivets Plastic Poppas Turnbuttons
For Sail & Grommet Hand Closing Tool
54 54 55 55 55 56 56 57 58 59
Press ‘n’ Snap
Clips
DTP1
Side Release Buckles
KPT RTP
Webbing Plastics Special Plastics
M1 M2
Webbing
Cord
MS Series
Cord Locks Cord Ends
29FEI
39F
Cord Clips
34
Terms & Conditions
60
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 3
Eyelets
Sail Eyelets The most versatile range of larger eyelets. They are used in banners, tents, shower curtains, automotive, textile and many other applications. Available with turnover rings or neck washers for automatic feeding on selected sizes. Made from brass most sizes are available in clean, nickel and oxy black finishes. Other finishes are available to special order. Sizes 23 and 24 are also available made from 304 stainless steel. See our machinery section for full details of setting equipment.
D
C
A
B
Standard Sail Eyelets A
B
C
D
Part No
Minimum Int Dia After Closing mm in 5.15 0.203 6.10 0.240 6.35 0.250 7.49 0.295 8.51 0.335 8.89 0.350 10.29 0.405 11.05 0.435 11.94 0.470 12.70 0.500 14.22 0.560 15.87 0.625 17.40 0.685 19.05 0.750 20.57 0.810 25.40 1.000
Overall Length
Flange
Flange
Metal
Thickness
Diameter
Thickness
mm in
mm in
mm in
mm in
18 20 21 22 23 24 25 26 27 28 29 30 31 32 33 35
4.37 0.172 5.15 0.203 5.54 0.218 5.84 0.230 5.97 0.235 6.35 0.250 6.73 0.265 7.14 0.281 7.52 0.296 7.92 0.312 8.33 0.320 8.71 0.343 9.52 0.375 9.65 0.380 10.23 0.430 12.32 0.485
0.79 0.031
9.53 0.375
0.30 0.30 0.30 0.33 0.33 0.35 0.35 0.35 0.38 0.41 0.41 0.46 0.47 0.51 0.51 0.56
0.012 0.012 0.012 0.013 0.013 0.014 0.014 0.014 0.015 0.016 0.016 0.018 0.018 0.020 0.020 0.022
0.51 0.020 12.19 0.4800 0.79 0.031 12.70 0.5000 0.79 0.031 14.27 0.5620 0.79 0.031 15.87 0.6250 0.79 0.031 17.45 0.6870 0.79 0.031 19.43 0.7650 0.79 0.031 20.32 0.8000 0.79 0.031 22.22 0.8750 0.79 0.031 23.29 0.9170 1.17 0.046 25.40 1.0000 1.17 0.046 28.57 1.1250 1.17 0.046 31.75 1.2500 1.57 0.062 34.03 1.3400 1.57 0.062 37.71 1.4850 1.57 0.062 43.81 1.7250
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 4
D
C
A
B
Long Sail Eyelets A
B
C
D
Part No
Minimum Int Dia
Overall Length
Flange
Flange
Metal
After Closing mm in
Thickness
Diameter
Thickness
mm in
mm in
mm in
mm in
LONG 21 LONG 22 LONG 23 LONG 24 LONG 25 LONG 26 LONG 27 LONG 28 LONG 29 LONG 30 LONG 32
6.350 0.250 7.490 0.295 8.510 0.335 8.890 0.350 10.290 0.405 11.050 0.435 11.94 0.470
6.350 0.250 7.870 0.310 8.000 0.315 8.250 0.325 8.380 0.330 9.120 0.359 9.520 0.375
0.790 0.031 12.700 0.500 0.790 0.031 14.270 0.562 0.790 0.031 15.870 0.625 0.790 0.031 17.450 0.687 0.790 0.031 19.840 0.781 0.790 0.031 20.620 0.812 0.790 0.031 22.220 0.875 0.790 0.031 23.800 0.937 1.170 0.046 25.400 1.000 1.170 0.046 28.320 1.115 1.170 0.046 35.520 1.359
0.300 0.012 0.350 0.014 0.350 0.014 0.380 0.015 0.350 0.014 0.410 0.016 0.410 0.016 0.460 0.018 0.510 0.020 0.510 0.020 0.510 0.020
12.700 0.500 10.160 0.400 14.220 0.560 10.290 0.405 15.870 0.625 10.800 0.425 19.050 0.750 12.070 0.475
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 5
Eyelets
Sheet Eyelets Sheet eyelets have many uses in sectors as diverse as sign making, industrial filter and transport. Similar to Sail eyelets they differ by having a wider flange in relation to their internal diameter. Made from brass most sizes are available in clean, nickel and oxy black finishes. There is also a choice of plain (flat), toothed and neck washers. Some sizes are available to special order only, please check for availability. See our machinery section for full details of setting equipment.
D
C
A
B
Sheet Eyelets A
B
C
D
Part No
Minimum Int Dia After Closing mm in 4.57 0.180 6.22 0.245 7.87 0.310 9.52 0.375 11.05 0.435 12.70 0.500 15.10 0.594
Overall Length
Flange
Flange
Metal
Thickness
Diameter
Thickness
mm in
mm in
mm in
mm in
00
4.32 0.170 5.33 0.2100 5.58 0.2200 6.35 0.2500 8.74 0.344 10.66 0.420 9.80 0.386
0.89 0.035 10.79 0.4250 0.89 0.035 13.84 0.5450 0.89 0.035 17.50 0.6890 0.89 0.035 20.70 0.8150 1.01 0.039 24.54 0.9660 1.21 0.048 26.63 1.0480 1.46 0.057 31.04 1.2220
0.25 0.30 0.33 0.35 0.40 0.45 0.47
0.009 0.012 0.013 0.014 0.016 0.018 0.019
0 1 2 3 4 5
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 6
Grommet Eyelets
Grommet eyelets with toothed washers offer a secure heavy duty method for hole reinforcement. Particularly useful in marine, transport, military and leisure applications where strong heavy duty textiles are used. Made from brass most sizes are
available in clean, nickel and oxy black finishes. Other finishes are available to special order. Sizes 3 and 4 are also available made from 316 stainless steel, great for marine use. See our machinery section for full details of setting equipment.
D
C
A
B
Grommet Eyelets A
B
C
D
Part No
Minimum Int Dia
Overall Length
Flange
Flange
Metal
After Closing mm in
Thickness
Diameter
Thickness
mm in
mm in
mm in
mm in
1351R/000
5.08 6.35 8.38 9.53
0.200 0.250 0.330 0.375 0.440 0.470
5.46 5.54 6.35 6.85 8.66 8.71 9.11
0.215 0.218 0.250 0.270 0.340 0.343 0.359 0.395 0.468 0.531 0.531 0.610
0.79 1.39 1.57 1.98 2.51 1.98 1.98 2.76 2.76 2.76 3.17 3.17
0.031 0.055 0.062 0.078 0.100 0.078 0.078 0.109 0.109 0.109 0.125 0.125
9.96
0.392 0.562 0.671 0.765 0.882 0.937 1.000 1.125 1.343 1.562
0.20 0.35 0.35 0.35 0.46 0.46 0.47 0.48 0.48 0.56 0.61 0.71
0.008 0.014 0.014 0.014 0.018 0.018 0.018 0.019 0.019 0.022 0.024 0.028
00
14.27 17.04 19.43 22.40 23.79 25.40 28.57 34.11 39.67 44.45 47.62
0 1
2 CAN 11.18
2 3 4 5 6 7 8
11.94
12.70 0.500
14.73
0.580
10.03 11.88 13.48 13.48 15.49
17.02 0.670
19.81 23.11 26.92
0.780 0.910 1.060
.750
1.875
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 7
Eyelets
Curtain Eyelets
DTP’S range of curtain eyelets is amongst the best to be found anywhere. The standard range consists of four sizes and 9 colours. We are sure that there will be something in the standard range to suit most tastes. Our range of sizes is designed specifically to
For that something a little different we have 5 further colours. Two specially engraved designs for the 40mm size eyelet are also available. We can supply tools and machinery to suit our entire range of curtain eyelets, usually from stock. We also offer an in house eyeleting service. Our eyelet setting section offers customers the eyelet heading of their choice without the need to purchase specialist machinery. If you are considering an eyelet header for your curtain then please contact one of our skilled sales advisors who will be happy to supply samples and discuss the options available.
suit a wide range of curtain pole sizes. Our standard eyelet sizes are as follows;
66mm hole diameter 50mm hole diameter 40mm hole diameter 30mm hole diameter 25mm hole diameter
66mm 50mm 40mm 30mm 25mm
Standard Finishes
Antique Brass
Antique Copper
Brass
Bright Gunmetal
Antique Nickel
Stainless Steel
Satin Nickel
Gunmetal
Nickel
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 8
Special Finishes
Square Curtain Eyelets
DTP Supplies’ range of square faced curtain eyelets are a new twist on the very popular fashion for eyelet headed curtains. The square face of the eyelet will give curtains a really distinctive and classy look. The eyelet can be set square to the top of the curtain or, by turning the face of the eyelet 45 degrees, in a diamond style. Available in our standard range of colours the square faced eyelet can be set using standard curtain eyelet machinery with a simple change of setting tools. As the eyelet makes use of the existing round barrel of the standard round eyelet there is no need to purchase new cutting tools. Don’t forget that DTP Supplies also has an in house eyelet setting service and this extremely popular service is also available for the new style square eyelets. Ask one of our skilled and knowledgeable sales advisors for a sample and further information.
Antique Brass
Antique Copper
Brass
Bright Gunmetal
Antique Nickel
Satin Nickel
Gunmetal
Nickel
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 9
Eyelets Metric Eyelets
D
are available. Please check if you cannot find the size you need below. Made from brass. Finishes include clean, nickel, oxy black and electro-tin. Other finishes are available to special order. See our machinery section for full details of setting equipment.
C
A comprehensive range of eyelets with dimensions that increase in units of 0.5mm or 1mm. They are often used in electronic applications but can be used wherever their size is appropriate. The table below shows the sizes we stock but other sizes
B
A
Part Number Barrel Diameter
Nominal Length
Overall Length Flange Diameter Flange Type
Part Number Barrel Diameter
Nominal Length
Overall Length Flange Diameter Flange Type
Under Flange A
B
C
D
Under Flange mm/in 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 4.50mm/0.177” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236”
mm/in
mm/in
mm/in
mm/in
mm/in
mm/in
mm/in
ME1520 ME1525 ME1530 ME1535 ME1540 ME1545 ME1550 ME1560 ME1570 ME1580 ME1590 ME15100 ME2020 ME2030 ME2035 ME2040 ME2050 ME2060 ME2070 ME2080 ME2090 ME20100 ME20110 ME20120 ME20130 ME2225 ME2230 ME2235 ME2240 ME2250 ME2260 ME2270 ME2280 ME2290 ME22100 ME22110 ME22120 ME2520 ME2525 ME2530 ME2535 ME2540 ME2550 ME2560 ME2570 ME2580 ME2590 ME25100 ME25110 ME25120 ME25130 ME25140 ME25150 ME25160 ME3020 ME3025 ME3030 ME3035 ME3040 ME3050 ME3060 ME3070 ME3080 ME3090 ME30100 ME30110 ME30120 ME30130 ME30140 ME30150 ME30160 ME30170 ME30180 ME30190 ME30200 ME3530
1.50mm/0.059” 1.50mm/0.059” 1.50mm/0.059” 1.50mm/0.059” 1.50mm/0.059” 1.50mm/0.059” 1.50mm/0.059” 1.50mm/0.059” 1.50mm/0.059” 1.50mm/0.059” 1.50mm/0.059” 1.50mm/0.059” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.00mm/0.079” 2.20mm/0.087” 2.20mm/0.087” 2.20mm/0.087” 2.20mm/0.087” 2.20mm/0.087” 2.20mm/0.087” 2.20mm/0.087” 2.20mm/0.087” 2.20mm/0.087” 2.20mm/0.087” 2.20mm/0.087” 2.20mm/0.087” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.00mm/0.118” 3.50mm/0.138”
2.00mm/0.079” 2.50mm/0.098” 3.00mm/0.118” 3.50mm/0.138” 4.00mm/0.157” 4.50mm/0.177” 5.00mm/0.197” 6.00mm/0.236” 7.00mm/0.276” 8.00mm/0.315” 9.00mm/0.354” 10.00mm/0.394” 2.00mm/0.079” 2.50mm/0.098” 3.00mm/0.118” 3.50mm/0.138” 4.00mm/0.157” 5.00mm/0.197” 6.00mm/0.236” 7.00mm/0.276” 8.00mm/0.315” 9.00mm/0.354” 10.00mm/0.394” 11.00mm/0.433” 12.00mm/0.472” 13.00mm/0.512” 2.50mm0.098” 3.00mm/0.118” 3.50mm/0.138” 4.00mm/0.157” 5.00mm/0.197” 6.00mm/0.236” 7.00mm/0.276” 8.00mm/0.315” 9.00mm/0.354” 10.00mm/0.394” 11.00mm/0.433” 12.00mm/0.472” 2.00mm/0.079” 2.50mm/0.098” 3.00mm/0.118” 3.50mm/0.138” 4.00mm/0.157” 5.00mm/0.197” 6.00mm/0.236” 7.00mm/0.276” 8.00mm/0.315” 9.00mm/0.354” 10.00mm/0.394” 11.00mm/0.433” 12.00mm/0.472” 13.00mm/0.512” 14.00mm/0.551” 15.00mm/0.591” 16.00mm/0.630” 2.00mm/0.079” 2.50mm/0.098” 3.00mm/0.118” 3.50mm/0.138” 4.00mm/0.157” 5.00mm/0.197” 6.00mm/0.236” 7.00mm/0.276” 8.00mm/0.315” 9.00mm/0.354” 10.00mm/0.394” 11.00mm/0.433” 12.00mm/0.472” 13.00mm/0.512” 14.00mm/0.551” 15.00mm/0.591” 16.00mm/0.630” 17.00mm/0.669” 18.00mm/0.709” 19.00mm/0.748” 20.00mm/0.787” 3.00mm/0.118”
2.40mm/0.094” 2.90mm/0.114” 3.40mm/0.134” 3.90mm/0.154” 4.40mm/0.173” 4.90mm/0.193” 5.40mm/0.213” 6.40mm/0.252” 7.40mm/0.291” 8.40mm/0.331” 9.40mm/0.370” 10.40mm/0.409” 2.45mm/0.096” 2.95mm/0.116” 3.45mm/0.136” 3.95mm/0.156” 4.45mm/0.175” 5.45mm/0.215” 6.45mm/0.254” 7.45mm/0.293” 8.45mm/0.333” 9.45mm/0.372” 10.45mm/0.411” 11.45mm/0.451” 12.45mm/0.490” 13.45mm/0.530” 3.00mm/0.118” 3.50mm/0.138” 4.00mm/0.157” 4.50mm/0.177” 5.50mm/0.217” 6.50mm/0.256” 7.50mm/0.295” 8.50mm/0.335” 9.50mm/0.374” 10.50mm/0.413” 11.50mm/0.453” 12.50mm/0.492” 2.55mm/0.100” 3.05mm/0.120” 3.55mm/0.140” 4.05mm/0.159” 4.55mm/0.179” 5.55mm/0.219” 6.55mm/0.258” 7.55mm/0.297” 8.55mm/0.337” 9.55mm/0.376” 10.55mm/0.415” 11.55mm/0.455” 12.55mm/0.494” 13.55mm/0.533” 14.55mm/0.573” 15.55mm/0.612” 16.55mm/0.651” 2.60mm/0.102” 3.10mm/0.122” 3.60mm/0.142” 4.10mm/0.161” 4.60mm/0.181” 5.60mm/0.220” 6.60mm/0.260” 7.60mm/0.299” 8.60mm/0.339” 9.60mm/0.378” 10.60mm/0.417” 11.60mm/0.457” 12.60mm/0.496” 13.60mm/0.535” 14.60mm/0.575” 15.60mm/0.614” 16.60mm/0.654” 17.60mm/0.693” 18.60mm/0.732” 19.60mm/0.772” 20.60mm/0.811” 3.65mm/0.144”
2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 2.50mm/0.098” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.50mm/0.138” 3.70mm/0.146” 3.70mm/0.146” 3.70mm/0.146” 3.70mm/0.146” 3.70mm/0.146” 3.70mm/0.146” 3.70mm/0.146” 3.70mm/0.146” 3.70mm/0.146” 3.70mm/0.146” 3.70mm/0.146” 3.70mm/0.146” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 4.00mm/0.157” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.00mm/0.197” 5.50mm/0.217”
Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round
ME3535 ME3540 ME3545 ME3550 ME3560 ME3570 ME3580 ME3590 ME35100 Me35110 ME35120 ME35130 ME35140 ME35150 ME35160 ME35170 ME35180 ME4030 ME4040 ME4045 ME4050 ME4060 ME4070 ME4080 ME4090 ME40100 ME40110 ME40120 ME40130 ME40140 ME40150 ME40160 ME40170 ME40180 ME40190 ME40200 ME4530 ME4540 ME4545 ME4550 ME4560 ME4570 ME4580 ME4590 ME45100 ME45110 ME45120 ME45130 ME45140 ME45150 ME5030 ME5040 ME5045 ME5050 ME5060 ME5070 ME5080 ME5090 ME50100 ME50110 ME50120 ME50130 ME50140 ME50150 ME50160 ME6040 ME6045 ME6050 ME6060 ME6070 ME6080 ME6090 ME60100 ME60110 ME60120 ME60130
3.50mm/0.138” 4.00mm/0.157” 4.50mm/0.177” 5.00mm/0.197” 6.00mm/0.236” 7.00mm/0.276” 8.00mm/0.315” 9.00mm/0.354” 10.00mm/0.394” 11.00mm/0.433” 12.00mm/0.472” 13.00mm/0.512” 14.00mm/0.551” 15.00mm/0.591” 16.00mm/0.630” 17.00mm/0.669” 18.00mm/0.709” 3.00mm/0.118” 4.00mm/0.157” 4.50mm/0.177” 5.00mm/0.197” 6.00mm/0.236” 7.00mm/0.276” 8.00mm/0.315” 9.00mm/0.354” 10.00mm/0.394” 11.00mm/0.433” 12.00mm/0.472” 13.00mm/0.512” 14.00mm/0.551” 15.00mm/0.591” 16.00mm/0.630” 17.00mm/0.669” 18.00mm/0.709” 19.00mm/0.748” 20.00mm/0.787” 3.00mm/0.118” 4.00mm/0.157” 4.50mm/0.177” 5.00mm/0.197” 6.00mm/0.236” 7.00mm/0.276” 8.00mm/0.315” 9.00mm/0.354” 10.00mm/0.394” 11.00mm/0.433” 12.00mm/0.472” 13.00mm/0.512” 14.00mm/0.551” 15.00mm/0.591” 3.00mm/0.118” 4.00mm/0.157” 4.50mm/0.177” 5.00mm/0.197” 6.00mm/0.236” 7.00mm/0.276” 8.00mm/0.315” 9.00mm/0.354” 10.00mm/0.394” 11.00mm/0.433” 12.00mm/0.472” 13.00mm/0.512” 14.00mm/0.551” 15.00mm/0.591” 16.00mm/0.630” 4.00mm/0.157” 4.50mm/0.177” 5.00mm/0.197” 6.00mm/0.236” 7.00mm/0.276” 8.00mm/0.315” 9.00mm/0.354” 10.00mm/0.394” 11.00mm/0.433” 12.00mm/0.472” 13.00mm/0.512”
5.14mm/0.163” 4.65mm/0.183” 5.15mm/0.203” 5.65mm/0.222” 6.65mm/0.262” 7.65mm/0.301” 8.65mm/0.341” 9.65mm/0.380” 10.65mm/0.419” 11.65mm/0.459” 12.65mm/0.498” 13.65mm/0.537” 14.65mm/0.577” 15.65mm/0.616” 16.65mm/0.655” 17.65mm/0.695” 18.65mm/0.734” 3.70mm/0.146” 4.70mm/0.185” 5.20mm/0.205” 5.70mm/0.224” 6.70mm/0.264” 7.70mm/0.303” 8.70mm/0.343” 9.70mm/0.382” 10.70mm/0.421” 11.70mm/0.461” 12.70mm/0.500” 13.70mm/0.539” 14.70mm/0.579” 15.70mm/0.618” 16.70mm//0.657” 17.70mm/0.697” 18.70mm/0.736” 19.70mm/0.775” 20.70mm/0.8156” 3.75mm/0.148” 4.75mm/0.187” 5.25mm/0.206” 5.75mm/0.226” 6.75mm/0.266” 7.75mm/0.305” 8.75mm/0.344” 9.75mm/0.384” 10.75mm/0.4223” 11.75mm/0.463” 12.75mm/0.501” 13.75mm/0.541” 14.75mm/0.581” 15.75mm/0.620” 3.80mm/0.149” 4.80mm/0.189” 5.30mm/0.208” 5.80mm/0.228” 6.80mm/0.268” 7.80mm/0.307” 8.80mm/0.346” 9.80mm/0.386” 10.80mm/0.425” 11.80mm/0.464” 12.80mm/0.504” 13.80mm/0.543” 14.80mm/0.582” 15.80mm/0.622” 16.80mm/0.661” 4.90mm/0.193” 5.40mm/0.213” 5.90mm/0.232” 6.90mm/0.272” 7.90mm/0.311” 8.90mm/0.350” 9.90mm/0.390” 10.90mm/0.429” 11.90mm/0.468” 12.90mm/0.508” 13.90mm/0.547”
5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 5.50mm/0.217” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.00mm/0.236” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 6.50mm/0.256” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 7.50mm/0.295” 8.00mm/0.315” 8.00mm/0.315” 8.00mm/0.315” 8.00mm/0.315” 8.00mm/0.315” 8.00mm/0.315” 8.00mm/0.315” 8.00mm/0.315” 8.00mm/0.315” 8.00mm/0.315” 8.00mm/0.315”
Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round
ME2025
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 10
DIN Eyelets The European standard range of eyelets. Similar in design to Sail eyelets but with metric hole diameters from 10mm in 2mm increments. Washer options include plain (flat), pierced and neck (for automatic feeding). Material options are brass, stainless steel and steel. Finishes include clean (brass), nickel. Other finishes are available to special order.
D
C
A
B
DIN Eyelets
A D Part Number Internal Diameter Overall Length Flange Thickness Flange Diameter Metal Thickness B C
Materials
after closing mm In
mm
In
mm
In
mm In mm In
No. 10 No. 12 No. 14 No. 16 No. 18 No. 20
10.00 0.393
7.00 0.275 1.27 0.050 20.00 0.787 0.37 0.015 Brass, Steel, St/Steel
11.50 0.458 7.30 0.287 1.15 0.045 24.00 0.945 0.37 0.015 Brass, Steel, St/Steel 13.80 0.543 8.00 0.315 1.34 0.0528 27.00 1.063 0.37 0.015 Brass, Steel, St/Steel 16.00 0.629 8.10 0.319 1.64 0.064 30.00 1.181 0.40 0.016 Brass, Steel, St/Steel 18.00 0.709 8.60 0.339 1.25 0.049 32.00 1.259 0.40 0.016 Brass, Steel, St/Steel 20.00 0.787 8.55 0.352 1.30 0.051 36.00 1.417 0.40 0.016 Brass, Steel, St/Steel
Stationery Eyelets Lightweight, slim eyelets for use in the paper and stationery industries. Predominantly used for tickets and labels although their use is not limited to these areas. Made from either brass or steel. Check below for details. Finishes include clean, nickel, oxy black.
C
Standard Finishes
Stationery Eyelets A Other finishes are available to special order. See our machinery section for full details of setting equipment.
B
Brass
Nickel
Oxy Black
A
Other finishes available on request
B
C
Part No
Barrel Diameter mm in
Overall Length mm in
Flange Diameter mm in
Flange Type
Metal
LAR3(F5/1)
3.00 3.89 3.89 4.01 4.01 4.50 4.50 4.57 4.70 4.70 4.70 4.70 4.75 4.83 4.90 4.97 5.94 5.94 6.60 8.00 9.14
0.118 0.153 0.153 0.158 0.158 0.177 0.177 0.180 0.185 0.185 0.185 0.185 0.187 0.190 0.193 0.196 0.234 0.234 0.260 0.315 0.360 0.394
7.13 2.03 3.17 3.05 4.44 3.33 4.00 3.55 3.02 3.56 4.57 7.49 5.07 5.08 3.76 2.61 3.65 3.40 3.71 3.18 3.42 4.63
0.281 0.079 0.125 0.120 0.175 0.131 0.157 0.140 0.119 0.140 0.180 0.295 0.200 0.200 0.148 0.103 0.144 0.134 0.146 0.125 0.135 0.182
6.98 5.97 5.97 5.84 6.04 6.56 6.56 6.47 6.60 6.99 6.99 6.99 7.75 7.24 7.11 6.35 7.92 7.95 9.14
0.275 0.235 0.235 0.230 0.238 0.258 0.258 0.255 0.260 0.275 0.275 0.275 0.305 0.285 0.280 0.250 0.312 0.313 0.360 0.425 0.460 0.530
FLAT FLAT FLAT FLAT FLAT FLAT FLAT FLAT
STEEL BRASS BRASS BRASS BRASS STEEL STEEL BRASS BRASS BRASS BRASS BRASS BRASS BRASS BRASS BRASS BRASS STEEL BRASS BRASS BRASS BRASS
02/80
02
Spec. 02
08
24 Stationery 25 Stationery
04
D7/JV2
FUNNEL ROUND ROUND ROUND ROUND ROUND
H081 H082 H084 H310 H066 H065
FLAT FLAT FLAT FLAT
JV3
52 8E 55 56
ROUND
10.80 11.68 13.46
FLAT FLAT
G128
315/101
10.00
ROUND
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 11
Eyelets
Boot & Shoe Eyelets
C
Traditionally used for footwear, uses of the boot and shoe range extend well beyond this. Most sizes are available made from brass or steel and with two pierce forms (star for splitting and round for rolling). Plain rings and neck washers (for automatic feeding) are available for most sizes. The 19C and 20A eyelets and HS700 and 650
eyelets are used together rather than an eyelet and washer combination to provide an extra strong setting. Finishes include clean, nickel, antique brass and oxy black. Ask about the range of decorative finishes, including painting, available on these eyelets. See our machinery section for full details of setting equipment.
B
A
Standard Finishes
Painted
Brass
Nickel
Oxy Black Antique Brass
Other finishes available on request
Boot & Shoe
A
B
C
Part No
Barrel Diameter
Overall Length
Flange Diameter
Flange Type
Metal
Pierce
mm mm in
mm in
mm in
G336 Blind
3.71 3.82 4.19 4.19 4.19 4.27 4.50 4.50 4.50 5.00 5.00 5.00 5.00 5.00 5.38 5.38 5.38 5.60 5.60 5.60 6.22 6.65 6.65 6.65 6.73
0.146 0.150 0.165 0.165 0.165 0.168 0.177 0.177 0.177 0.197 0.197 0.197 0.197 0.197 0.212 0.212 0.212 0.220 0.220 0.220 0.245 0.262 0.262 0.262 0.265
2.97 5.00 4.14 4.14 4.65 5.46 4.20 5.00 5.50 5.60 4.50 5.20 6.10 6.60 4.70 5.33 5.46 5.40 6.25 6.70 4.70 5.84 6.60 7.36 4.70
0.117 0.197 0.163 0.163 0.183 0.216 0.165 0.197 0.217 0.220 0.177 0.205 0.240 0.260 0.185 0.210 0.215 0.212 0.246 0.264 0.185 0.230 0.260 0.290 0.185
5.97 6.20 7.37 7.37 7.37 7.62 7.50 7.50 7.50 8.80 8.80 8.80 8.80 8.80 9.91 9.91 9.96 9.80 9.80 9.80 9.78
0.235 0.244 0.290 0.290 0.290 0.300 0.295 0.295 0.295 0.346 0.346 0.346 0.346 0.346 0.390 0.390 0.392 0.386 0.386 0.386 0.385 0.465 0.465 0.465 0.465
FLAT
Brass
Star
958
ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND ROUND
Brass/Steel
Either Round
H303
Brass Brass Brass Brass
Rimmon Ord Rimmon Long
Star
Round
EL200
Star
1054
Brass/Steel Brass/Steel Brass/Steel Brass/Steel Brass/Steel Brass/Steel Brass/Steel
Either Either Either Either Either Either Either Either Round Either Either Either Round Round Round Star Star
1054 1/4 1054 1/2 1252 H5 1252 H4
1252
1252 H55 1252 H6
Steel Brass Brass Brass
Mogul Ordinary
Mogul Long
20A
1351
Brass/Steel Brass/Steel Brass/Steel
1351 1 / 2 1351 3 / 4
19C
Brass Brass Brass Brass Brass
HS700
11.81 11.81 11.81 11.81
M700RP
L700
Star Star
00 Columbia
Ordinary
00 Columbia
6.73
0.265
6.86
0.270
11.81
0.465
ROUND
Brass
Star
X Long 1450 1450 3 / 4
6.80 6.80 7.21
0.267 0.262 0.284
6.00 7.48 4.83
0.236 0.294 0.190
11.65 11.65 11.81
0.459 0.448 0.465
ROUND ROUND ROUND
Brass/Steel Brass/Steel
Either Either
650
Brass
Un-nicked
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 12
368
336
364
395
419
434
EH305
Mostly used for shoes and boots although they can be used anywhere a quick and secure lacing method is required. Whether for decoration on fashion footwear or function on work and hiking boots our range is versatile and comprehensive. The majority of hooks are closed by rolling the shank of the hook unless indicated otherwise.
Most sizes are made from steel for strength and can be specified in a variety of finishes. Setting tools are required to get the best results. See our machinery section for full details of setting equipment.
Ski Hooks Name
Overall Height mm inches
Head Size (d x w)
Head Height
Barrel Dia Material Note
mm
inches
mm inches mm inches
368 336 355 364 395 419 434 11.00 0.433 8.00 x 7.70 0.315 x 0.303 5.15 0.20 34.30 0.169 Steel 11.00 0.433 8.00 x 8.70 0.315 x 0.343 5.25 0.207 4.50 0.177 Steel 11.80 0.465 8.60 x 7.80 0.339 x 0.307 6.40 0.252 4.90 0.193 Steel N/A N/A 16.50 x 18.00 0.650 x 0.709 7.50 0.295 N/A N/A Steel 12.65 0.498 10.10 x 9.45 0.398 x 0.372 7.00 0.276 4.70 0.185 Steel 12.75 0.502 9.20 x 10.00 0.362 x 0.394 5.80 0.228 4.70 0.185 Steel 11.50 0.453 8.50 x 7.70 0.335 x 0.303 6.10 0.240 4.10 0.161 Steel EH305 9.50 0.374 7.20 x 9.30 0.283 x 0.366 5.80 0.228 N/A N/A Steel Peerless 10.20 0.402 8.60 x 6.50 0.339 x 0.256 3.90 0.154 N/A N/A Brass
Separate cap & stem
Separate stem
302
342
358
383
Loop Hooks Name Overall Length
RingSize (w x d)
Overall Height
Barrel Dia Material Note
mm inches
mm
inches
mm inches mm inches
302 342 358 383
17.50 0.689 9.30 x 5.30 0.374 x 0.209 7.80 0.307 4.60 0.181 Steel 20.30 0.799 9.30 x 5.30 0.374 x 0.209 1.25 0.049 N/A N/A Steel 25.35 0.998 10.80 x 8.33 0.425 x 0.328 9.25 0.364 4.90 0.193 Steel
Separate cap & stem
21.20 0.835
N/A
N/A
9.25 0.364 N/A N/A Steel
Separate cap & stem
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 13
Eyelets
Self Piercing Eyelets Based on standard eyelet sizes this range offers the benefit of one action cutting and setting when used with the appropriate tool. This greatly speeds up the setting process. Made from brass, most sizes are available in clean, nickel and oxy black finishes. Other finishes are available to special order. Size SPW is also available made from 304 or 316 stainless steel depending on length. See our machinery section for full details of setting equipment.and training on specialist machinery.
C
D
B
A
Standard Finishes
Self Piercing Eyelets Leather & Fashion Eyelets A
Brass
Nickel
Oxy Black
Other finishes available on request
B
C
Part No
Barrel Diameter
Overall Length
Flange Diameter
Flange Type
mm 4.44 5.59
in
mm 4.49 5.46
in
mm 6.98 9.78
in
SP200 SP500
0.175 0.220
0.177 0.215
0.275 0.385
Round Round
Sail Eyelets with Turnover Rings A D
B
C
Part No
Barrel Diameter mm in
Internal Diameter mm in
Overall Length mm in
Flange Diameter mm in
Note
SPU SPV SPG SPW
7.80 9.10 9.90
0.307 0.358 0.390 0.417 0.417 0.417 0.472 0.488 0.555 0.681
6.50 8.20 9.30 9.70 9.70 9.70
0.256 0.323 0.366 0.382 0.382 0.382 0.441 0.465 0.508 0.638
4.35 5.30 5.30 5.90
0.171 0.209 0.209 0.232 0.423 0.535 0.244 0.228 0.260 0.295
12.80 15.80 19.00 19.10 19.10 19.10 20.84 24.50 24.00 28.60
0.504 0.622 0.748 0.752 0.752 0.752 0.820 0.965 0.945 1.126
with plain ring
with plain ring
10.60 10.60 10.60 12.00 12.40 14.10 17.30
also available in stainless steel
SPW Med
10.75 13.60
also available in stainless steel
SPW Lg
SPX SPK SPY SPZ
11.20 11.80 12.90 16.20
6.20 5.80 6.60 7.50
with plain ring
Grommet Eyelets with Tooth Washers A D
B
C
Part No
Barrel Diameter
Internal Diameter
Overall Length
Flange Diameter
mm 7.80 9.10
in
mm 6.50 8.20
in
mm 4.35 5.30 9.70
in
mm
in
SP1 SP2 SP4
0.307 0.358 0.638
0.256 0.323 0.598
0.171 0.209 0.381
12.80 15.80 28.10
0.504 0.622 1.106
16.20
15.20
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 14
C
Tube Eyelets As their name implies tube eyelets are manufactured from tubing. Using this process makes this type of eyelet a more flexible option for relatively small production runs. The use of tube also allow for longer barrel lengths than traditional pressed eyelets. Normally made from Brass. Steel, Stainless Steel, Copper and Aluminium are also available to special order. Finishes include clean, nickel, oxy black and electro-tin. Other finishes are available to special order. See our machinery section for full details of setting equipment.
B
Flange Types Available
A B Round C Countersunk Available as standard in brass. Other metals including steel, stainless steel and copper available from a variety of metal thicknesses. Other specialist products including rib pins, ferrules and connectors can be made to order. A Flat
Tube Eyelets
A
B
C
Part No
Barrel Diameter
Length Under Flange Standard Metal Thickness
Flange Diameter
mm 0.80 1.00 1.20 1.50 2.00 2.20 2.30 2.50 3.00 3.50 4.00 4.50 4.76 5.00 5.50 6.00 6.35 7.00 7.92 8.00 9.00
in
mm 0.20 0.20 0.20 0.25 0.30 0.30 0.30 0.30 0.30 0.30 0.40 0.40 0.40 0.40 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 0.50 1.00 1.00 1.00 1.00 1.00
in
mm 1.30 1.60 2.00 2.50 3.20 3.50 3.70 4.00 4.50 5.30 6.00 6.80 7.20 7.50 8.30 9.00 9.00
in
M08 M10 M12 M15 M20 M22 M23 M25 M30 M35 M40 M45 M50 M55 M60
0.031 0.039 0.047 0.059 0.079 0.086 0.091 0.098 0.118 0.138 0.157 0.177 0.187 0.197 0.217 0.236 0.250 0.276 0.312 0.315 0.354 0.394 0.406 0.472 0.591 0.709 0.787 0.984 1.181 1.378 1.575
As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified As specified
0.008 0.008 0.008 0.012 0.012 0.012 0.012 0.012 0.012 0.012 0.016 0.016 0.016 0.016 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.019 0.039 0.039 0.039 0.039 0.039
0.051 0.063 0.079 0.098 0.126 0.138 0.146 0.157 0.177 0.209 0.236 0.268 0.283 0.295 0.327 0.354 0.354 0.413 0.452 0.472 0.531 0.591 0.531 0.709 0.866 1.024 1.102 1.339 1.575 1.811 2.047
M476
M635
M70
10.50 11.50 12.00 13.50 15.00 13.50 18.00 22.00 26.00 28.00 34.00 40.00 46.00 52.00
M792
M80 M90
M100 M103 M120 M150 M180 M200 M250 M300 M350 M400
10.00 10.30 12.00 15.00 18.00 20.00 25.00 30.00 35.00 40.00
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 15
Eyelets
D
Multipurpose Eyelets Check here if you cannot find the eyelet you need in our other ranges. Alternatively, use the eyelet selector on our home page – www.dtpsupplies.com. Other finishes are available to special order. See our machinery section for full details of setting equipment.
C
B
A
Standard Finishes
Brass
Nickel
Oxy Black
A
B
C
D
Part Number
Barrel Diameter
Length Under Flange Overall Length
Flange Diameter Flange Type Metal
Pierce
mm 1.20 1.27 1.42 1.57 1.57 1.70 1.70 1.75 1.98 2.16 2.16 2.29 2.29 2.29 2.29 2.54 2.84 2.85 3.00 3.00 3.00 3.00 3.10 3.10 3.10 3.20 3.20 3.20 3.20 3.71 3.76 3.76 3.76 3.76 3.56 3.89 3.89 4.00 4.00 4.00 4.01 4.01 4.19
In
mm
In
mm
In
mm
In
L855 L216 G803 L171 L357 G895 L001 G798 L585 L892 L899 L137 L894 L896 L895 L083 L093 CEP1
0.047 1.98 0.050 2.06 0.056 2.13 0.062 2.44 0.062 3.76 0.067 2.54 0.067 3.02 0.069 2.41 0.078 5.99 0.085 3.23 0.085 5.38 0.090 2.01 0.090 3.12 0.090 3.68 0.090 3.96 0.100 5.99 0.112 2.72 0.112 2.84 0.118 3.00 0.118 4.50 0.118 6.00 0.118 6.81 0.122 5.74 0.122 6.47 0.122 7.49 0.126 3.58 0.126 4.75 0.126 5.56 0.126 7.14 0.146 2.64 0.148 3.20 0.148 4.75 0.148 5.54 0.148 7.14 0.140 4.30 0.153 1.70 0.153 2.84 0.157 3.00 0.157 4.50 0.157 6.00 0.158 2.72 0.158 4.11 0.165 3.48 0.165 3.48 0.165 3.99
0.078 2.29 0.081 2.54 0.084 2.54 0.096 2.84 0.148 4.06 0.100 2.79 0.119 3.43 0.095 2.79 0.236 6.40 0.127 3.61 0.212 5.89 0.079 2.41 0.123 3.68 0.145 4.19 0.156 4.50 0.236 6.40 0.107 3.05 0.112 3.14 0.118 3.50 0.177 5.00 0.236 6.50 0.268 7.14 0.226 6.10 0.254 6.80 0.295 7.82 0.141 4.34 0.187 5.54 0.219 6.32 0.281 8.00 0.104 2.97 0.126 3.81 0.187 5.36 0.218 6.15 0.281 7.75 0.169 5.00 0.067 2.03 0.112 3.18 0.118 3.61 0.177 5.11 0.236 6.60 0.107 3.05 0.162 4.44 0.137 4.14 0.137 4.14 0.157 4.65
0.090 2.01 0.100 2.16 0.100 3.00 0.112 2.29 0.160 2.79 0.110 4.06 0.135 2.67 0.110 3.00 0.252 3.20 0.142 4.11 0.232 4.19 0.095 3.30 0.145 3.68 0.165 4.06 0.177 3.68 0.252 3.81 0.120 5.59 0.124 4.62 0.138 4.50 0.197 4.50 0.256 4.50 0.281 6.99 0.240 5.53 0.268 5.53 0.308 5.54 0.171 5.59 0.218 5.59 0.249 5.59 0.315 5.59 0.117 5.97 0.150 5.59 0.211 5.59 0.242 5.59 0.305 5.59 0.197 6.20 0.080 5.97 0.125 5.97 0.142 6.50 0.201 6.50 0.260 6.50 0.120 5.84 0.175 6.05 0.163 7.37 0.163 7.37 0.183 7.37
0.079 Round 0.085 Round
Brass Brass
Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Round Either Round Round Round Round Round Round Round Round Round Round Star
0.118 Round Steel/ S/Steel
0.090 Round
Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Steel Steel Steel Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass
0.110 0.160
Flat Flat
0.105 Round 0.118 Round 0.126 Round
0.162
Flat
0.165 Round
0.130
Flat
0.145 Round 0.160 Round 0.145 Round 0.150 Round
0.220 0.182
Flat Flat
S/Steel
ME3030 ME3045 ME3060
0.117 Round 0.177 Round 0.177 Round
LAR3/F5/1
0.275 0.218 0.218 0.218
Flat Flat Flat Flat
3160 3170 3175
G594 9/64 G594 3/16 G594 7/32 G594 9/32 G336 Blind G601 3/16 G601 7/32 G601 9/32 3160B
0.220 Round 0.220 Round 0.220 Round 0.220 Round 0.220 Round 0.220 Round 0.220 Round 0.220 Round 0.235 Flat
958
0.244 Round Brass/Steel
02/80
0.235 0.235
Flat Flat
02
ME4030 ME4045 ME4060 Spec. 02
0.256 Round 0.256 Round 0.256 Round
0.230 0.238
Flat Flat
08
H303 *
0.290 Round 0.290 Round 0.290 Round
Rimmon Ord* 4.19 Rimmon Lg* 4.19
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 16
A
B
C
D
Part Number
Barrel Diameter
Length Under Flange Overall Length
Flange Diameter Flange Type Metal
Pierce
mm 4.27 4.44 4.44
In
mm
In
mm
In
mm
In
EL200* SP200
0.168 4.78 0.175 3.81 0.175 5.21 0.177 3.00 0.177 3.67 0.177 3.47 0.177 4.27 0.177 4.77 0.177 3.00 0.177 4.50 0.177 6.00 0.180 3.23 0.185 2.08 0.185 2.79 0.185 3.81 0.185 6.73 0.187 4.32 0.187 6.10 0.187 6.89 0.190 4.55 0.193 3.43 0.197 3.70 0.197 4.60 0.197 4.80 0.148 3.96 0.193 8.51 0.193 8.51 0.196 2.26 0.197 3.90 0.197 4.50 0.212 3.86 0.212 5.23 0.212 8.00 0.220 4.57 0.220 4.67 0.220 5.52 0.220 5.97 0.234 3.30 0.234 3.17 0.236 4.50 0.236 6.00 0.245 3.78 0.250 4.42 0.255 5.59 0.260 2.79 0.262 4.90 0.262 5.66 0.262 6.43 0.265 3.76 0.265 5.92 0.268 5.11 0.148 3.96 0.268 6.65 0.275 3.20 0.284 3.89 0.303 4.00 0.315 2.79 0.320 2.72 0.343 4.75 0.350 8.38 0.360 3.05 0.394 4.00 0.504 2.90
0.188 5.46 0.150 4.49 0.205 5.92 0.118 3.33 0.144 4.00 0.137 4.20 0.168 5.00 0.188 5.50 0.118 3.56 0.177 5.05 0.236 6.55 0.127 3.56 0.082 3.02 0.110 3.56 0.150 4.57 0.265 7.49 0.170 5.08 0.240 8.00 0.271 8.03 0.179 5.08 0.135 3.76 0.146 4.50 0.181 5.20 0.189 5.60 0.156 4.57 0.335 9.09 0.335 9.09 0.089 2.62 0.154 4.55 0.177 5.16 0.152 4.70 0.206 6.10 0.315 8.89 0.180 5.46 0.184 5.40 0.217 6.25 0.250 6.70 0.130 3.66 0.125 3.40 0.177 5.30 0.236 6.80 0.149 4.70 0.174 5.33 0.220 6.35 0.110 3.71 0.193 5.84 0.223 6.60 0.253 7.37 0.148 4.70 0.233 6.86 0.201 6.00 0.156 4.57 0.262 7.48 0.126 4.14 0.153 4.83 0.157 4.90 0.110 3.18 0.107 3.68 0.187 5.95 0.330 9.14 0.120 3.42 0.157 4.63 0.114 3.30
0.215 7.62 0.177 6.98 0.233 6.86 0.131 6.56 0.157 6.56 0.165 7.50 0.197 7.50 0.217 7.50 0.140 7.00 0.199 7.00 0.258 7.00 0.140 6.48 0.119 6.60 0.140 6.99 0.180 6.99 0.295 6.99 0.200 7.75 0.315 7.42 0.316 6.60 0.200 7.24 0.148 7.11 0.177 8.80 0.205 8.80 0.220 8.80 0.180 5.59 0.358 6.35 0.358 6.35 0.103 6.35 0.179 8.70 0.203 8.00 0.185 9.91 0.240 9.91 0.350 9.78 0.215 9.78 0.213 9.80 0.246 9.80 0.264 9.80 0.144 7.92 0.134 7.95 0.209 9.50 0.268 9.50 0.185 9.78 0.210 8.64 0.250 8.76 0.146 9.14 0.230 11.81 0.260 11.81 0.290 11.81 0.185 11.81 0.270 11.81 0.236 11.65 0.180 5.59 0.294 11.65 0.163 9.40 0.190 11.81 0.193 12.00 0.125 10.80 0.145 11.05 0.234 14.65 0.360 13.59 0.135 11.68 0.182 13.46 0.130 15.57
0.300 Round 0.275 Round 0.270 Round
Brass Brass Brass Steel Steel
Star
Round Round Round Round Either Either Either Round Round Round Round Round Round Round Round Round Either Either Either Either Round Round Round Round Round Round Either Either Either Round Round Round Round Round Round Round Round Round Round Either Round Round Round Round Round Round Round Round Round Round Star Round Star Star Star Round Star Star Star Star Either Roll
H091
24 Stationery 4.50 25 Stationery 4.50
0.258 0.258
Flat Flat
1054*
4.50 4.50 4.50 4.50 4.50 4.50 4.57 4.70 4.70 4.70 4.70 4.75 4.75 4.75 4.83 4.90 5.00 5.00 5.00 3.76 4.90 4.90 4.98 5.00 5.00 5.38 5.38 5.38 5.59 5.60 5.60 5.60 5.94 5.95 6.00 6.00 6.22 6.35 6.48 6.60 6.65 6.65 6.65 6.80 3.76 6.80 6.99 7.21 7.70 8.00 8.13 8.72 8.89 9.14
0.295 Round Brass/Steel 0.295 Round Brass/Steel 0.295 Round Brass/Steel
1054 1 / 4 * 1054 1 / 2 * ME4530 ME4545 ME4560
0.276 Round 0.276 Round 0.276 Round 0.260 Funnel 0.275 Round 0.275 Round 0.275 Round 0.305 Round 0.292 Funnel 0.260 Funnel 0.285 Round 0.255 Flat
Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Steel Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass Brass
04
D7/JV2
H081 H082 H084 H310 5420 5430 H066 H065
0.280
Flat
1252H4
0.346 Round Brass/Steel 0.346 Round Brass/Steel
1252
1252H5 1252H6
0.346 Round 0.220 Round 0.250 Round
2318 5080
0.250 0.250
Flat Flat
JV3
49 *
0.343 Round 0.315 Round 0.390 Round 0.390 Round 0.385 Round 0.385 Round
ME5045
Mogul Ord*
H313*
540*
SP500 1351*
0.386 Round Brass/Steel 0.386 Round Brass/Steel 0.386 Round Brass/Steel
1351 1 / 2 * 1351 3 / 4 *
52 8E
0.312 0.313
Flat Flat
ME6045 ME6060
0.374 Round 0.374 Round 0.385 Round 0.340 Round 0.345 Round 0.360 Round 0.465 Round 0.465 Round 0.465 Round 0.465 Round 0.465 Round
19C
G415 P010
55
HS700*
M700RP*
L700*
00 Col. Ord.* 6.73 00 Col. X Lg* 6.73
1450*
0.459 Round Brass/Steel
G601 5/32 1450 3 / 4 *
0.220 Round
0.459 Round Brass/Steel
G665
0.370 Round 0.465 Round 0.472 Round 0.425 Round 0.435 Round
650
BME*
56
L010
6365 Vent
0.578
Flat
P012 G128
0.535 Round
0.460
Flat
315/101
10.00 12.80
0.530 Round
L490
0.609
Flat
* denotes washer available for auto feeding
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 17
Plastic Eyelets
Plastic Eyelets
Plastic eyelets are a revolutionary alternative to traditional metal eyelets. They are perfect for outdoor use as they will not tarnish or rust and as they are UV protected they will not fade in sunlight. Plastic Eyelets are ideal for applications where weight is a major consideration. They are ideal for use where metal eyelets are undesirable, for example with foodstuffs. Plastic eyelets do not conduct electricity or heat and can be used in temperatures from -30°C to +100°C. Plastic eyelets are available in hole diameters of 8mm,12mm, 16mm, 25mm and 40mm and in a variety of colours.
8mm
12mm
Plastic eyelets are available in standard black, white and transparent and can be colour matched to the customers specifications, either in opaque or translucent colour.
16mm
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 18
D
C
B
A
25mm
Plastic Eyelets A
B
C
D
Part No Min Int Dia after closing
Overall Length mm in
Flange Thickness mm in
Flange Diameter mm in
Materials
mm in
8mm 8.00 12mm 11.90 12mm Long 11.90 16mm 16.00 25mm 25.00 40mm 40.00
0.315 0.468
8.00 8.30
0.315 0.327 0.421 0.551 0.485 0.496
1.58 2.72 2.72 3.00 4.10 4.45
0.062 0.107 0.107 0.118 0.161 0.175
14.85 26.10 26.10 30.00 47.00 62.20
0.585 1.028 1.028 1.149 1.850 2.459
Polycarbon Polycarbon Polycarbon Polycarbon Polycarbon Polycarbon
0.468 10.70 0.629 14.00 0.984 12.33 1.575 12.60
40mm
l Plastic eyelets are recyclable l Plastic eyelets do not need heat to be set l Suitable for use in extremes of temperature (-30°C to +100°C) l Plastic eyelets are ideal for outdoor use as they do not rust or tarnish l Plastic eyelets do not conduct heat or electricity l UV protected so will not fade l Can be used in places where metal eyelets are not allowed l Can be supplied in any colour, solid or transparent. Standard colours include white, black and clear transparent. l Plastic eyelets can be set using traditional eyelet machines (including automatic machines)
DTP can supply eyeletting machines and dies specially produced to set Plastic Eyelets eyelets. We have a range of manual and automatic machines. Please see pages 44 to 47.
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 19
Made with FlippingBook Annual report