DTP Supplies Brochure Eyelets and More

DIN Eyelets The European standard range of eyelets. Similar in design to Sail eyelets but with metric hole diameters from 10mm in 2mm increments. Washer options include plain (flat), pierced and neck (for automatic feeding). Material options are brass, stainless steel and steel. Finishes include clean (brass), nickel. Other finishes are available to special order.

D

C

A

B

DIN Eyelets

A D Part Number Internal Diameter Overall Length Flange Thickness Flange Diameter Metal Thickness B C

Materials

after closing mm In

mm

In

mm

In

mm In mm In

No. 10 No. 12 No. 14 No. 16 No. 18 No. 20

10.00 0.393

7.00 0.275 1.27 0.050 20.00 0.787 0.37 0.015 Brass, Steel, St/Steel

11.50 0.458 7.30 0.287 1.15 0.045 24.00 0.945 0.37 0.015 Brass, Steel, St/Steel 13.80 0.543 8.00 0.315 1.34 0.0528 27.00 1.063 0.37 0.015 Brass, Steel, St/Steel 16.00 0.629 8.10 0.319 1.64 0.064 30.00 1.181 0.40 0.016 Brass, Steel, St/Steel 18.00 0.709 8.60 0.339 1.25 0.049 32.00 1.259 0.40 0.016 Brass, Steel, St/Steel 20.00 0.787 8.55 0.352 1.30 0.051 36.00 1.417 0.40 0.016 Brass, Steel, St/Steel

Stationery Eyelets Lightweight, slim eyelets for use in the paper and stationery industries. Predominantly used for tickets and labels although their use is not limited to these areas. Made from either brass or steel. Check below for details. Finishes include clean, nickel, oxy black.

C

Standard Finishes

Stationery Eyelets A Other finishes are available to special order. See our machinery section for full details of setting equipment.

B

Brass

Nickel

Oxy Black

A

Other finishes available on request

B

C

Part No

Barrel Diameter mm in

Overall Length mm in

Flange Diameter mm in

Flange Type

Metal

LAR3(F5/1)

3.00 3.89 3.89 4.01 4.01 4.50 4.50 4.57 4.70 4.70 4.70 4.70 4.75 4.83 4.90 4.97 5.94 5.94 6.60 8.00 9.14

0.118 0.153 0.153 0.158 0.158 0.177 0.177 0.180 0.185 0.185 0.185 0.185 0.187 0.190 0.193 0.196 0.234 0.234 0.260 0.315 0.360 0.394

7.13 2.03 3.17 3.05 4.44 3.33 4.00 3.55 3.02 3.56 4.57 7.49 5.07 5.08 3.76 2.61 3.65 3.40 3.71 3.18 3.42 4.63

0.281 0.079 0.125 0.120 0.175 0.131 0.157 0.140 0.119 0.140 0.180 0.295 0.200 0.200 0.148 0.103 0.144 0.134 0.146 0.125 0.135 0.182

6.98 5.97 5.97 5.84 6.04 6.56 6.56 6.47 6.60 6.99 6.99 6.99 7.75 7.24 7.11 6.35 7.92 7.95 9.14

0.275 0.235 0.235 0.230 0.238 0.258 0.258 0.255 0.260 0.275 0.275 0.275 0.305 0.285 0.280 0.250 0.312 0.313 0.360 0.425 0.460 0.530

FLAT FLAT FLAT FLAT FLAT FLAT FLAT FLAT

STEEL BRASS BRASS BRASS BRASS STEEL STEEL BRASS BRASS BRASS BRASS BRASS BRASS BRASS BRASS BRASS BRASS STEEL BRASS BRASS BRASS BRASS

02/80

02

Spec. 02

08

24 Stationery 25 Stationery

04

D7/JV2

FUNNEL ROUND ROUND ROUND ROUND ROUND

H081 H082 H084 H310 H066 H065

FLAT FLAT FLAT FLAT

JV3

52 8E 55 56

ROUND

10.80 11.68 13.46

FLAT FLAT

G128

315/101

10.00

ROUND

Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 11

Made with FlippingBook Annual report