DTP Supplies Brochure: Eyelets and More
DIN Eyelets The European standard range of eyelets. Similar in design to Sail eyelets but with metric hole diameters from 10mm in 2mm increments. Washer options include plain (flat), pierced and neck (for automatic feeding). Material options are brass, stainless steel and steel. Finishes include clean (brass), nickel. Other finishes are available to special order.
D
C
A
B
DIN Eyelets
A D Part Number Internal Diameter Overall Length Flange Thickness Flange Diameter Metal Thickness B C
Materials
after closing mm In
mm
In
mm
In
mm In mm In
No. 10 No. 12 No. 14 No. 16 No. 18 No. 20
10.00 0.393
7.00 0.275 1.27 0.050 20.00 0.787 0.37 0.015 Brass, Steel, St/Steel
11.50 0.458 7.30 0.287 1.15 0.045 24.00 0.945 0.37 0.015 Brass, Steel, St/Steel 13.80 0.543 8.00 0.315 1.34 0.0528 27.00 1.063 0.37 0.015 Brass, Steel, St/Steel 16.00 0.629 8.10 0.319 1.64 0.064 30.00 1.181 0.40 0.016 Brass, Steel, St/Steel 18.00 0.709 8.60 0.339 1.25 0.049 32.00 1.259 0.40 0.016 Brass, Steel, St/Steel 20.00 0.787 8.55 0.352 1.30 0.051 36.00 1.417 0.40 0.016 Brass, Steel, St/Steel
Stationery Eyelets Lightweight, slim eyelets for use in the paper and stationery industries. Predominantly used for tickets and labels although their use is not limited to these areas. Made from either brass or steel. Check below for details. Finishes include clean, nickel, oxy black.
C
Standard Finishes
Stationery Eyelets A Other finishes are available to special order. See our machinery section for full details of setting equipment.
B
Brass
Nickel
Oxy Black
A
Other finishes available on request
B
C
Part No
Barrel Diameter mm in
Overall Length mm in
Flange Diameter mm in
Flange Type
Metal
LAR3(F5/1)
3.00 3.89 3.89 4.01 4.01 4.50 4.50 4.57 4.70 4.70 4.70 4.70 4.75 4.83 4.90 4.97 5.94 5.94 6.60 8.00 9.14
0.118 0.153 0.153 0.158 0.158 0.177 0.177 0.180 0.185 0.185 0.185 0.185 0.187 0.190 0.193 0.196 0.234 0.234 0.260 0.315 0.360 0.394
7.13 2.03 3.17 3.05 4.44 3.33 4.00 3.55 3.02 3.56 4.57 7.49 5.07 5.08 3.76 2.61 3.65 3.40 3.71 3.18 3.42 4.63
0.281 0.079 0.125 0.120 0.175 0.131 0.157 0.140 0.119 0.140 0.180 0.295 0.200 0.200 0.148 0.103 0.144 0.134 0.146 0.125 0.135 0.182
6.98 5.97 5.97 5.84 6.04 6.56 6.56 6.47 6.60 6.99 6.99 6.99 7.75 7.24 7.11 6.35 7.92 7.95 9.14
0.275 0.235 0.235 0.230 0.238 0.258 0.258 0.255 0.260 0.275 0.275 0.275 0.305 0.285 0.280 0.250 0.312 0.313 0.360 0.425 0.460 0.530
FLAT FLAT FLAT FLAT FLAT FLAT FLAT FLAT
STEEL BRASS BRASS BRASS BRASS STEEL STEEL BRASS BRASS BRASS BRASS BRASS BRASS BRASS BRASS BRASS BRASS STEEL BRASS BRASS BRASS BRASS
02/80
02
Spec. 02
08
24 Stationery 25 Stationery
04
D7/JV2
FUNNEL ROUND ROUND ROUND ROUND ROUND
H081 H082 H084 H310 H066 H065
FLAT FLAT FLAT FLAT
JV3
52 8E 55 56
ROUND
10.80 11.68 13.46
FLAT FLAT
G128
315/101
10.00
ROUND
Tel: 01706 368534 Email: sales@dtpsupplies.com Web: www.dtpsupplies.com 11
Made with FlippingBook Annual report